Automaattinen PE-kalvokutistekäärintäkoneen holkkikutistuskone
Kone on kehitetty erityisesti kivennäisvesi-, juomaviini-, olut-, tuote- ja pian-infuusiolääkepullojen yhdistelmäpakkauksille, vakaalla toiminnalla ja pakatut tuotteet tiiviisti ja järjestyksessä. Sitä voidaan käsitellä yhtenä työntökoneena, kun vaaditaan suurta nopeutta.
Tuotteen esittely
Automaattinen PE-kalvon lämpökutiste{0}}käärepakkauskone

Kuinka automaattinen Pe-kalvokutistekäärintäkoneen holkkikutistekone toimii
1.After filling, capping and labelling, product containers are then transported into the wrapping unit, by means of a side mounted kuljetin.
2.Here, a pneumatic pusher collates the containers into a preselected pack formation,
which upon completion is transferred forward into the welding position.
3.At this stage the pack is clamped, the welding bar descends to complete the wrap,
and the pusher returns to prepare the next collation of tuote.
4. As the welding bar ascends the pusher advances to transfer the new collation into the welding position, at the same time displacing the previously wrapped collation onto continuously moving shrink tunnel kuljetin.
5.The wrapped collation soon enters the shrink tunnel chamber where recirculated hot air causes the wrap to shrink, and tightly conform to the contours of the contents.
6.Once the pack is out of the hot chamber, forced air cooling is used to tighten the sleeve wrap to achieve a strong, secure pack ready for stacking on a pallet or placing in a shipping carton.
| Malli | KM |
| Power consumption | Sleeve wrapper 220V/50-6-HZ/1phase |
| Shrink tunnel 380V/50-60Hz/3phase | |
| Max product size | 320 (P) 150 (L) 200 (K) mm |
| Max Packing capacity | Up to 10 PPM |
| Applicable Film | Polyeteeni (PE) kalvo |
| Film | 600mm (leveys), 30-100 mikro (paksuus) |
| Shrink tunnel | 2800mm(L), entrance 600(W)400(H)mm |
| Shrink tunnel conveyor | Teflon mesh belt conveyor |
| Air pressure | Less than or equal to 0.5MPa(5 bar) |
| Paino (noin) | Shrink wrapper 220kgs |
| Shrink tunnel 380kgs | |
| Yleensä ottaen | Shrink wrapper 1200x1000x1800mm |
| Shrink tunnel 3000x1200x1700mm |
Aaron Wang
Myyntipäällikkö kloKuningas kone
Puhelin/Whatsapp/Wechate: plus 86-15262329005
Sähköposti: aaron@king-machine.com
Verkkosivusto:http://www.king{0}}machine.com/
https://www.liquidpackingmahines.com/
LISÄÄ: NO.22 East Seven Road Donglai Town, Zhangjiagangin kaupunki, Jiangsun maakunta, Kiina
Suositut Tagit: automaattinen pe-kalvokutistepakkauskoneen holkkikutistekone, Kiina, valmistajat, toimittajat, tehdas, hinta, myytävänä
Lähetä kysely
Saatat myös pitää







